您現在的位置:首頁 > 技術支持 > 詳細內容
電阻溫度計的使用說明書
點擊次數:2728 更新時間:2018-08-24
 電阻溫度計的使用說明書   Type Series GA27xx

1 General Information

These operating instructions contain information necessary for the proper installation and
use of this device. In addition to these instructions, be sure to observe all statutory
requirements, applicable standards, the additional technical specifications on the
accompanying data sheet (see ) as well as the specifications indicated on
the type plate.

1.1 Intended Use
GA27xx MiniTherm resistance thermometers are intended for measuring temperatures in
technical processes. For a correct function the permissible temperature ranges indicated
on the type plate must not be exceeded.

1.2 General Safety Notes
The installation, set up, service or removal of this device must only be done by trained,
qualified personnel using suitable equipment and authorized to do so by the plant
operator.

1.3 CE Marking
The CE marking on these devices certifies their compliance with the applicable
EU Directives for placing products on the market within the European Union.
The following guideline applies to model series GA27xx MiniTherm:
                       EMC Guideline EMC 2004/108/EC
                        ATEX Guideline ATEX 94/9/EG (for GA 27x1)

1.4 ATEX Approval
Devices of the type GA 27x1 are certified for use in explosive environments.
Electrical equipment in explosive environments must be installed and commissioned by
competent and properly instructed personnel.
Modifications to devices or electrical connections might negatively influence the operating
safety, the ex-proofing or the guarantee.

2 Transportation and Storage
Store and transport these devices only under clean, dry conditions. Avoid exposure to
shocks and excessive vibrations.
Permissible storage temperature: -40 °C…+100 °C

3 Installation and Commissioning
Before installing the device, be sure that the device is suitable for the intended application
with respect to temperature range, pressure range, compatibility with the monitored
medium and pressure port fitting type. The used gaskets must be compatible with the used
process connection and resistant to the medium.
The process connection determines the permissible process pressure. Operating the
device beyond its nominal pressure limit, e.g. clamp-connections, requires specially
designed and approved mounting elements.

4 Operation
During device operation, take care that the device remains within its intended temperature
range, that its maximum operating pressure is not exceeded and that it is not harmed by
the medium to which it is exposed. No other monitoring is necessary.
Permissible process temperature: -50…+200 °C
Permissible ambient temperature: -40…+100 °C
If the device is equipped with a transmitter the permissible ambient temperature is reduced
to 85 °C.

4.1 Maintenance
When properly installed in accordance with applicable specifications, this device is
maintenance-free. However, we recommend an annual recalibration of the device.
In the event of a device malfunction, you can only replace the complete measuring insert
resp. the head transmitter.

5 Removal
Make sure that the pipe and the device has cooled down before you attempt to remove it
or wear appropriate protection clothing to avoid burns.
Relieve the process system pressure before you attempt to remove the device. Shut off
the pressure source for all feed lines and relieve the pressure in them.
Attempting to remove the device from a still-pressurized or hot system may result
in severe injury.
De-energize the power supply to the device before disconnecting the electrical
connections. Once this is done, the device may be mechanically removed.
Be sure that residue in the process system and in the device itself do not present a danger
to humans or the environment. During dismantling and removal, the device must be easy
to remove from the process system. Do not apply any force during removal work. After the
device has been removed, seal off the measuring point and mark the open process
accordingly.

Removed devices may contain hazardous deposits and residue. When removing
or transporting these devices, be sure to take appropriate safety precautions.

分享到:

加入收藏 | 返回列表 | 返回頂部
上海漣浚工程設備有限公司 版權所有 滬ICP備13048375號-1
座機:021-50195005-8010
董小姐
手機:19916557244

儀表網

推薦收藏該企業網站
主站蜘蛛池模板: 国产永久免费高清在线观看视频| 欧美交换乱理伦片在线观看| 男生和女生一起差差在线观看| 成年人在线免费看| 国产v片成人影院在线观看| 久久久久久国产精品视频 | 色婷婷在线影院| 日本道在线观看| 国产乱色在线观看| 久久久久777777人人人视频| 色费女人18毛片a级毛片视频| 无码国模国产在线观看| 国产AV午夜精品一区二区三区| 中文字幕国产欧美| 精品人妻少妇一区二区三区在线| 妺妺窝人体色WWW聚色窝仙踪| 免费中文字幕不卡视频| 99这里只有精品66视频| 欧美日韩精品一区二区三区不卡| 国产精品嫩草影院在线看| 亚洲va韩国va欧美va| 三年片免费高清版| 百合潮湿的欲望| 在线免费视频a| 亚洲人成77777在线播放网站| 国产亚洲国产bv网站在线| 日韩中文字幕在线不卡| 国产va免费精品高清在线观看| 一本久久伊人热热精品中文 | 99在线精品免费视频| 欧美影院在线观看| 国产成人精品一区二区三区| 久久久久久亚洲精品| 粗大的内捧猛烈进出在线视频| 国内精品视频一区二区三区八戒| 亚洲制服丝袜在线播放| 8x8x在线观看视频高清视频| 最近免费中文字幕完整7| 国产一区二区在线|播放| www视频在线观看天堂| 欧美极品欧美日韩|